CD-ROM
| Media type | Optical disc |
|---|---|
| Capacity | 194 MiB (8 cm) 650–900 MiB (12 cm) |
| Read mechanism | 150 KiB/s (1×) 10,800 KiB/s (72×) |
| Write mechanism | 150 KiB/s (1×) 8,400 KiB/s (56×) |
| Standard | ISO/IEC 10149[1] |
| Usage | Data storage, video, audio, open internet |
| Optical media types | |
|---|---|
|
|
| Standards | |
|
|
| See also | |
A CD-ROM (
/ˌsiːˌdiːˈrɒm/, an acronym of "Compact Disc Read-only memory") is a pre-pressed compact disc that contains data accessible to, but not writable by, a computer for data storage and music playback. The 1985 “Yellow Book” standard developed by Sony and Philips adapted the format to hold any form of binary data.[2]
CD-ROMs are popularly used to distribute computer software, including video games and multimedia applications, though any data can be stored (up to the capacity limit of a disc). Some CDs hold both computer data and audio with the latter capable of being played on a CD player, while data (such as software or digital video) is only usable on a computer (such as ISO 9660 format PC CD-ROMs). These are called enhanced CDs.
Although many people use lowercase letters in this acronym, proper presentation is in all capital letters with a hyphen between CD and ROM. At the time of the technology's introduction it had more capacity than computer hard drives common at the time. The reverse is now true, with hard drives far exceeding CDs, DVDs and Blu-ray, though some experimental descendants of it such as HVDs may have more space and faster data rates than today's biggest hard drive.
Contents[hide] |
[edit] Media
CD-ROM discs are identical in appearance to audio CDs, and data are stored and retrieved in a very similar manner (only differing from audio CDs in the standards used to store the data). Discs are made from a 1.2 mm thick disc of polycarbonate plastic, with a thin layer of aluminium to make a reflective surface. The most common size of CD-ROM disc is 120 mm in diameter, though the smaller Mini CD standard with an 80 mm diameter, as well as numerous non-standard sizes and shapes (e.g., business card-sized media) are also available. Data is stored on the disc as a series of microscopic indentations. A laser is shone onto the reflective surface of the disc to read the pattern of pits and lands ("pits", with the gaps between them referred to as "lands"). Because the depth of the pits is approximately one-quarter to one-sixth of the wavelength of the laser light used to read the disc, the reflected beam's phase is shifted in relation to the incoming beam, causing destructive interference and reducing the reflected beam's intensity. This pattern of changing intensity of the reflected beam is converted into binary data.
[edit] Standard
Several formats are used for data stored on compact discs, known as the Rainbow Books. These include the original Red Book standards for CD audio, White Book and Yellow Book CD-ROM. The ISO/IEC 10149 / ECMA-130 standard, which gives a thorough description of the physics and physical layer of the CD-ROM, inclusive of cross-interleaved Reed-Solomon coding (CIRC) and eight-to-fourteen modulation (EFM), can be downloaded from ISO[1] or ECMA.[3]
ISO 9660 defines the standard file system of a CD-ROM, although it is due to be replaced by ISO 13490 (which also supports CD-R and multi-session). UDF extends ISO 13346 (which was designed for non-sequential write-once and re-writeable discs such as CD-R and CD-RW) to support read-only and re-writeable media and was first adopted for DVD. The bootable CD specification, to make a CD emulate a hard disk or floppy, is called El Torito.
CD-ROM drives are rated with a speed factor relative to music CDs (1× or 1-speed which gives a data transfer rate of 150 KiB/s). 12× drives were common beginning in early 1997. Above 12× speed, there are problems with vibration and heat. Constant angular velocity (CAV) drives give speeds up to 30× at the outer edge of the disc with the same rotational speed as a standard constant linear velocity (CLV) 12×, or 32× with a slight increase. However due to the nature of CAV (linear speed at the inner edge is still only 12×, increasing smoothly in-between) the actual throughput increase is less than 30/12 – in fact, roughly 20× average for a completely full disc, and even less for a partially filled one.
Problems with vibration, owing to e.g. limits on achievable symmetry and strength in mass produced media, mean that CD-ROM drive speeds have not massively increased since the late 90s. Over 10 years later, commonly available drives vary between 24× (slimline and portable units, 10× spin speed) and 52× (typically CD- and read-only units, 21× spin speed), all using CAV to achieve their claimed "max" speeds, with 32× through 48× most common. Even so, these speeds can cause poor reading (drive error correction having become very sophisticated in response) and even shattering of poorly made or physically damaged media, with small cracks rapidly growing into catastrophic breakages when centripetally stressed at 10,000 – 13,000 rpm (i.e. 40–52× CAV). High rotational speeds also produce undesirable noise from disc vibration, rushing air and the spindle motor itself. Thankfully, most 21st century drives allow forced low speed modes (by use of small utility programs) for the sake of safety, accurate reading or silence, and will automatically fall back if a large number of sequential read errors and retries are encountered.
Other methods of improving read speed were trialled such as using multiple optical beams, increasing throughput up to 72× with a 10× spin speed, but along with other technologies like 90~99 minute recordable media and "double density" recorders, their utility was nullified by the introduction of consumer DVDROM drives capable of consistent 36× CD-ROM speeds (4× DVD) or higher. Additionally, with a 700 MB CD-ROM fully readable in under 2½ minutes at 52× CAV, increases in actual data transfer rate are decreasingly influential on overall effective drive speed when taken into consideration with other factors such as loading/unloading, media recognition, spin up/down and random seek times, making for much decreased returns on development investment. A similar stratification effect has since been seen in DVD development where maximum speed has stabilised at 16× CAV (with exceptional cases between 18× and 22×) and capacity at 4.3 and 8.5 GiB (single and dual layer), with higher speed and capacity needs instead being catered to by Blu-ray drives.
[edit] CD-ROM format
A CD-ROM sector contains 2,352 bytes, divided into 98 24-byte frames. Unlike a music CD, a CD-ROM cannot rely on error concealment by interpolation, and therefore requires a higher reliability of the retrieved data. In order to achieve improved error correction and detection, a CD-ROM has a third layer of Reed–Solomon error correction.[4] A Mode-1 CD-ROM, which has the full three layers of error correction data, contains a net 2,048 bytes of the available 2,352 per sector. In a Mode-2 CD-ROM, which is mostly used for video files, there are 2,336 user-available bytes per sector. The net byte rate of a Mode-1 CD-ROM, based on comparison to CDDA audio standards, is 44100 Hz × 16 bits/sample × 2 channels × 2,048 / 2,352 /8 = 153.6 kB/s = 150 KiB/s. The playing time is 74 minutes, or 4,440 seconds, so that the net capacity of a Mode-1 CD-ROM is 682 MB or, equivalently, 650 MiB.
A 1× speed CD drive reads 75 consecutive sectors per second.
CD sector contents
- A standard 74 min. CD contains 333,000 blocks or sectors.
- Each sector is 2,352 bytes, and contains 2,048 bytes of PC (mode 1) data, 2,336 bytes of PSX/VCD (mode 2) data, or 2,352 bytes of audio.
- The difference between sector size and data content are the header information and the error-correcting codes, that are big for data (high precision required), small for VCD (standard for video) and none for audio. Note that all of these, including audio, still benefit from a lower layer of error correction at a sub-sector level.
- If extracting the disc in raw format (standard for creating images)
always extract 2,352 bytes per sector, not 2,048/2,336/2,352 bytes
depending on data type (basically, extracting the whole sector). This
fact has two main consequences:
- Recording data CDs at very high speed (40×) can be done without losing information. However, as audio CDs do not contain a third layer of error-correcting codes, recording these at high speed may result in more unrecoverable errors or 'clicks' in the audio.
- On a 74 minute CD, one can fit larger images using raw mode, up to 333,000 × 2,352 = 783,216,000 bytes (~747 MiB). This is the upper limit for raw images created on a 74 min or ~650 MiB Red Book CD. The 14.8% increase is due to the discarding of error correction data
- The sync pattern for Mode 1 CDs is
0x00ffffffffffffffffffff00[3]
- An image size is always a multiple of 2,352 bytes (the size of a block) when extracting in raw mode.[5]
| Layout type | ← 2,352 byte block → | |||||
| CD digital audio: | 2,352 Digital audio |
|||||
|---|---|---|---|---|---|---|
| CD-ROM (mode 1): | 12 Sync. |
4 Sector id. |
2,048 Data |
4 Error detection |
8 Zero |
276 Error correction |
| CD-ROM (mode 2): | 12 Sync. |
4 Sector id. |
2,336 Data |
|||
[edit] Manufacture
Pre-pressed CD-ROMs are mass-produced by a process of stamping where a glass master disc is created and used to make "stampers", which are in turn used to manufacture multiple copies of the final disc with the pits already present. Recordable (CD-R) and rewritable (CD-RW) discs are manufactured by a different method, whereby the data are recorded on them by a laser changing the properties of a dye or phase transition material in a process that is often referred to as "burning".
[edit] Capacity
CD-ROM capacities are normally expressed with binary prefixes, subtracting the space used for error correction data. A standard 120 mm, 700 MB CD-ROM can actually hold about 737 MB (703 MiB) of data with error correction (or 847 MB total). In comparison, a single-layer DVD-ROM can hold 4.7 GB of error-protected data, more than 6 CD-ROMs.
| Type | Sectors | Data max. size | Audio max. size | Time | |
|---|---|---|---|---|---|
| (MB) | Approx. (MiB) | (MB) | (min) | ||
| 8 cm | 94,500 | 193.536 | 184.570 | 222.264 | 21 |
| 283,500 | 580.608 | 553.711 | 666.792 | 63 | |
| 650 MB | 333,000 | 681.984 | 650.391 | 783.216 | 74 |
| 700 MB | 360,000 | 737.280 | 703.125 | 846.720 | 80 |
| 800 MB | 405,000 | 829.440 | 791.016 | 952.560 | 90 |
| 900 MB | 445,500 | 912.384 | 870.117 | 1,047.816 | 99 |
| Note: megabyte (MB) and minute (min) values are exact; MiB values are approximate. | |||||
[edit] CD-ROM drives
CD-ROM discs are read using CD-ROM drives. A CD-ROM drive may be connected to the computer via an IDE (ATA), SCSI, SATA, FireWire, or USB interface or a proprietary interface, such as the Panasonic CD interface. Virtually all modern CD-ROM drives can also play audio CDs as well as Video CDs and other data standards when used in conjunction with the right software.
CD-ROM drive can sometimes be a misnomer for newer drives that are capable for reading and burning DVDs, the CD's successor which is now the standard optical disc drive.
[edit] Laser and optics
CD-ROM drives employ a near-infrared 780 nm laser diode. The laser beam is directed onto the disc via an opto-electronic tracking module, which then detects whether the beam has been reflected or scattered.
[edit] Transfer rates
If a CD-ROM is read at the same rotational speed as an audio CD, the data transfer rate is 150 KiB/s, commonly referred to as "1×". At this data rate, the track moves along under the laser spot at about 1.2 m/s. To maintain this linear velocity as the optical head moves to different positions, the angular velocity is varied from 500 rpm at the inner edge to 200 rpm at the outer edge. By increasing the speed at which the disc is spun, data can be transferred at greater rates. For example, a CD-ROM drive that can read at 8× speed spins the disc at 1600 to 4000 rpm, giving a linear velocity of 9.6 m/s and a transfer rate of 1200 KiB/s. Above 12× speed most drives read at Constant angular velocity (CAV, constant rpm) so that the motor is not made to change from one speed to another as the head seeks from place to place on the disc. In CAV mode the "×" number denotes the transfer rate at the outer edge of the disc, where it is a maximum. 20× was thought to be the maximum speed due to mechanical constraints until Samsung Electronics introduced the SCR-3230, a 32x CD-ROM drive which uses a ball bearing system to balance the spinning disc in the drive to reduce vibration and noise. As of 2004, the fastest transfer rate commonly available is about 52× or 10,400 rpm and 7.62 MiB/s. Higher spin speeds are limited by the strength of the polycarbonate plastic of which the discs are made. At 52×, the linear velocity of the outermost part of the disk is around 65 m/s. However, improvements can still be obtained by the use of multiple laser pickups as demonstrated by the Kenwood TrueX 72× which uses seven laser beams and a rotation speed of approximately 10×.
CD-Recordable drives are often sold with three different speed ratings, one speed for write-once operations, one for re-write operations, and one for read-only operations. The speeds are typically listed in that order; i.e. a 12×/10×/32× CD drive can, CPU and media permitting, write to CD-R discs at 12× speed (1.76 MiB/s), write to CD-RW discs at 10× speed (1.46 MiB/s), and read from CD discs at 32× speed (4.69 MiB/s).
The 1× speed rating for CD-ROM (150 KiB/s) is different than the 1× speed rating for DVDs (1.32 MiB/s).
| Transfer speed | KiB/s | Mbit/s | RPM |
|---|---|---|---|
| 1× | 150 | 1.23 | 200–500 |
| 2× | 300 | 2.46 | 400-1,000 |
| 4× | 600 | 4.92 | 800–2,000 |
| 8× | 1,200 | 9.83 | 1,600–4,000 |
| 10× | 1,500 | 12.3 | 2,000–5,000 |
| 12× | 1,800 | 14.7 | 2,400–6,000 |
| 20× | 1,200–3,000 | up to 24.6 | 4,000 (CAV) |
| 32× | 1,920–4,800 | up to 39.3 | 4,800 (CAV) |
| 36× | 2,160–5,400 | up to 44.2 | 7,200 (CAV) |
| 40× | 2,400–6,000 | up to 49.2 | 8,000 (CAV) |
| 48× | 2,880–7,200 | up to 59.0 | 9,600 (CAV) |
| 52× | 3,120–7,800 | up to 63.9 | 10,400 (CAV) |
| 56× | 3,360–8,400 | up to 68.8 | 11,200 (CAV) |
| 72× | 6,750–10,800 | up to 88.5 | 2,000 (multi-beam) |
[edit] Copyright issues
There has been a move by the recording industry to make audio CDs (CDDAs, Red Book CDs) unplayable on computer CD-ROM drives, to prevent the copying of music. This is done by intentionally introducing errors onto the disc that the embedded circuits on most stand-alone audio players can automatically compensate for, but which may confuse CD-ROM drives. Consumer rights advocates are as of October 2001 pushing to require warning labels on compact discs that do not conform to the official Compact Disc Digital Audio standard (often called the Red Book) to inform consumers which discs do not permit full fair use of their content.
In 2005, Sony BMG Music Entertainment was criticised when a copy protection mechanism known as Extended Copy Protection (XCP) used on some of their audio CDs automatically and surreptitiously installed copy-prevention software on computers (see 2005 Sony BMG CD copy protection scandal). Such discs are not legally allowed to be called CDs or Compact Discs because they break the Red Book standard governing CDs, and Amazon.com for example describes them as "copy protected discs" rather than "compact discs" or "CDs".
Software distributors, and in particular distributors of computer games, often make use of various copy protection schemes to prevent software running from any media besides the original CD-ROMs. This differs somewhat from audio CD protection in that it is usually implemented in both the media and the software itself. The CD-ROM itself may contain "weak" sectors to make copying the disc more difficult, and additional data that may be difficult or impossible to copy to a CD-R or disc image, but which the software checks for each time it is run to ensure an original disc and not an unauthorized copy is present in the computer's CD-ROM drive.
Manufacturers of CD writers (CD-R or CD-RW) are encouraged by the music industry to ensure that every drive they produce has a unique identifier, which will be encoded by the drive on every disc that it records: the RID or Recorder Identification Code.[6] This is a counterpart to the The Source IDentification Code (SID)—the Source Identification Code, an eight character code beginning with "IFPI" that is usually stamped on discs produced by CD recording plants.
[edit] See also
- Computer hardware
- CD shattering
- CD/DVD authoring
- DVD-Audio
- DVD-ROM
- MultiLevel Recording, an obsolete technology (with non-binary modulation)
- Optical disc drive
- Phase-change Dual
- Red Book (audio CD standard)
- Thor-CD
[edit] References
This article was originally based on material from the Free On-line Dictionary of Computing, which is licensed under the GFDL.
- ^ a b ISO (1995). "ISO/IEC 10149:1995 – Information technology – Data interchange on read-only 120 mm optical data disks (CD-ROM)". http://www.iso.org/iso/catalogue_detail.htm?csnumber=25869. Retrieved 2010-08-06.
- ^ EP 689208 "Method for block oriented addressing" – for block layouts see columns 1 and 2
- ^ a b Data Interchange on Read-only 120 mm Optical Data Disks (CD-ROM). ECMA. June 1996. http://www.ecma-international.org/publications/standards/Ecma-130.htm. Retrieved 2009-04-26.
- ^ Note that the CIRC error correction system used in the CD audio format has two interleaved layers.
- ^ "Optical Media FAQs" (PDF). Archived from the original on 2006-10-22. http://web.archive.org/web/20061022035649/http://memorex.com/downloads/whitepapers/WhitePaper_Reference_Guide_Optical_Media_Mar2406.pdf. Retrieved 2007-01-06.
- ^ Schoen, Seth (July 20, 2007). "Harry Potter and the Digital Fingerprints". Electronic Frontier Foundation. http://www.eff.org/deeplinks/2007/07/harry-potter-and-digital-fingerprints. Retrieved October 24, 2007.
